Environmental And Remedial Treatments For Hydrocarbons

 
Products

 

Welcome to E.A.R.T.H.’S product catalog page. We offer a variety of Environmentally friendly products that represent the very best in Hydrocarbon Remediation and Treatment.

From our inception we have been a provider of environmentally friendly and cost effective solutions for everyday environmental problems faced by the oil and petrochemical  industries in Trinidad and Tobago. From research and development to packaging and shipping, quality and customer satisfaction is engineered into every product  and into the E.A.R.T.H. designed systems in which they work.

Because our quality control standards are high, we manufacture only the highest caliber Of Enzyme Treating Products. Our goal is always to deliver Solutions. Your satisfaction is of paramount importance. 

Below is a short list of the products we Offer.

 

 EC Clean

Our EC line of enzyme  products exhibit the unique property of converting most oil based substances  into a 100% biodegradable soap/stearate derivative safe enough for disposal in any sewage system, municipal sewage treatment, open seas or land farming operations without affecting fresh water sources. They will also chelate most heavy metals and leave no petrochemical distillates after proper treatment.  MSDS

 

 EC 101 - Cuttings Wash

 We have developed a drill cuttings wash system, which virtually removes all hydrocarbon,Synthetic based mud and Non-Aqueaous fluids contamination from drilled cuttings before it is discharged  into the  sea.   This system was designed to  efficiently expose the hydrocarbon contaminated drill cuttings to the EC 101 Cuttings Wash enabling effective removal of the hydrocarbon or non  aqueous fluid.  Our Cuttings  Wash EC 101 used with this agitator has been able to reduce hydrocarbons on  cuttings from 27% to 0.05% in one pass, other mechanical treatments are only able to discharge the same percentage to only 10% - 15%.  MSDS

 

 EC 102 - Tank Cleaner

 Our EC line of enzyme products exhibit the unique property of converting most oil based substances  into a 100% biodegradable soap/stearate derivative safe enough for disposal in any sewage system, municipal sewage treatment, open seas or land farming operations without affecting fresh water sources. They will also chelate most heavy metals and leave no petrochemical distillates after proper treatment.This Product will put your formation fines in any tank bottom into solution with minimal pump agitation. MSDS

 

 EC 103 - Emulsion Breaker

EC 103 breaks down the long chain and cyclic paraffins (along with other long chain  hydrocarbons such as asphaltenes) allowing them to return to the oil phase  permanently. For this reason, most oils/crude can no longer nucleate solids or  water. Therefore we have the unique capability of dewatering and separating the heaviest crude without the use of heat or any other costly chemicals and/or equipment. MSDS

 

 EC 104 - Rig Wash

EC 104 product exhibits the unique property of converting most oil based substances into a 100% biodegradable soap/stearate derivative safe enough for disposal in any  sewage system, municipal sewage treatment, open seas or land farming operation  without affecting fresh water sources. They will also chelate most heavy metals and leave no petrochemical distillates after proper treatment.  MSDS

 

 EC 106 - Viscosity Reducer EC 106 was designed for the treatment of difficult paraffin and asphaltene problems. When applied correctly, we normally see a significant reduction in viscosity allowing most solids to separate rapidly, at that time.  EC 106 breaks down the long chain and cyclic paraffins (along with other long chain hydrocarbons such as asphaltenes) allowing them to return to the oil phase permanently. For this reason, most oils/crude can no longer nucleate solids or water. Therefore we have the unique capability of dewatering and separating the heaviest crude without the use of heat or any other costly chemicals and/or equipment.

E.C. 106 can be forced into the formation injected continuously via gas lift injection lines or chemical injection lines, Injected on Flow lines, Discharge into lines & manifolds or used for well cleanouts after drilling, work-overs & completions. MSDS

 

 EC Paraffin and Asphaltene Dispersant

This product was designed  to release paraffin and asphaltene buildup in the well bore, Screens, Liners, Down hole  pumps, valves, Tubing, annulus and flow lines. MSDS

 

 EC 300 - Heavy Duty Degreaser

EC 300 Heavy Duty Degreaser exhibits the unique property of converting most oil based substances into a 100% biodegradable soap/stearate derivative safe enough for disposal in any sewage system, municipal sewage treatment, open seas or land farming operations  without affecting fresh water sources. MSDS

 

For more information or to place an order, please contact us either via email at info@earthtt.com You may also call us at 868-653-7576,868-653-7571 from 8 am till 5 pm

We look forward to serving you.

 

.

[Home] [About Us] [Products] [Services] [Case Studies]

This Site was Created and Is Maintained by Darron Lord